國際標準(ISO)
ISO 10102:2001 -螺釘和螺母用裝配工具--雙頭呆扳手--扳手長度和頭部厚度
Assembly tools for screws and nuts -- Double-headed open-ended engineers' wrenches -- Length of wrenches and thickness of the headsISO 10103:2001 -螺釘和螺母用裝配工具--雙頭直頸和彎頸梅花扳手--扳手長度和頭部厚度
Assembly tools for screws and nuts -- Double-headed, flat and offset, box wrenches -- Length of wrenches and thickness of the headsISO 10104:2001 -螺釘和螺母用裝配工具--雙頭、深偏移和修改偏移、套筒板手--長度扳手與頭部的厚度
Assembly tools for screws and nuts -- Double-headed, deep offset and modified offset, box wrenches -- Length of wrenches and thickness of the headsISO 1085:1999 -螺釘和螺母用裝配工具--雙頭扳手--對邊尺寸組配
Assembly tools for screws and nuts -- Double-ended wrenches -- Size pairingISO 1173:2001 -螺釘和螺母用裝配工具--手動和機動旋轉頭的傳動端及連接部件--尺寸，轉矩測試
Assembly tools for screws and nuts -- Drive ends for hand- and machine-operated screwdriver bits and connecting parts -- Dimensions, torque testingISO 1174-1:2011 -裝配工具螺釘和螺母 - 傳動四方 - 第1部分：手套筒工具的傳動四方
Assembly tools for screws and nuts -- Driving squares -- Part 1: Driving squares for hand socket toolsISO 15601:2000 -錘--鋼制錘頭技術規範--測試程序
Hammers -- Technical specifications concerning steel hammer heads -- Test proceduresISO 2236:1991 -螺釘和螺母用裝配工具--鍛制的和管狀套筒板手--頭部最大外形尺寸
Assembly tools for screws and nuts -- Forged and tubular socket wrenches -- Maximum outside head dimensionsISO 2725-1:2007 -螺釘和螺母用裝配工具--第1部分：手動扳手
Assembly tools for screws and nuts -- Square drive sockets -- Part 1: Hand-operated socketsISO 2936:2001 -螺釘和螺母用裝配工具--內六角扳手
Assembly tools for screws and nuts -- Hexagon socket screw keysISO 3315:2011 -裝配工具螺釘和螺母 - 驅動零件手工操作的四方傳動套筒扳手 - 尺寸和試驗
Assembly tools for screws and nuts -- Driving parts for hand-operated square drive socket wrenches -- Dimensions and testsISO 3316:2012 -裝配工具螺釘和螺母 - 附件用於手工操作的四方傳動套筒扳手 - 尺寸和試驗
Assembly tools for screws and nuts -- Attachments for hand-operated square drive socket wrenches -- Dimensions and testsISO 3317:2009 -螺釘和螺母用裝配工具--電源插座扳手的六角方形驅動適配器或圓柱平驅動器
Assembly tools for screws and nuts -- Square drive adaptor with hexagon or cylindrical flat drive, for power socket wrenchesISO 3318:2009 -螺釘和螺母用裝配工具--雙頭開放式扳手、雙頭梅花扳手與兩用扳手--最大寬度為頭部
Assembly tools for screws and nuts -- Double-headed open-ended wrenches, double-headed box wrenches and combination wrenches -- Maximum widths of headsISO 4229:2009 -螺釘和螺母用裝配工具--低轉矩應用單頭工程的扳手--頭部與測試扭矩的最大外形尺寸
Assembly tools for screws and nuts -- Single-head engineer's wrenches for lower torque applications -- Maximum outside dimensions of heads and test torquesISO 5742:2004 -夾扭鉗和剪切鉗--術語
Pliers and nippers -- NomenclatureISO 5743:2004 -夾扭鉗和剪切鉗--通用技術條件
Pliers and nippers -- General technical requirementsISO 5744:2004 -夾扭鉗和剪切鉗--測試方法
Pliers and nippers -- Methods of testISO 5745:2004 -夾扭鉗和剪切鉗--夾扭鉗--尺寸和測試值
Pliers and nippers -- Pliers for gripping and manipulating -- Dimensions and test valuesISO 5746:2004 -夾扭鉗和剪切鉗--鋼絲鉗和電工鉗--尺寸和測試值
Pliers and nippers -- Engineer's and "Lineman's" pliers -- Dimensions and test valuesISO 5747:1995 -夾扭鉗和剪切鉗--杠杆輔助的側剪鉗、端剪切鉗和斜口鉗--尺寸和測試值
Pliers and nippers -- Lever assisted side cutting pliers, end and diagonal cutting nippers -- Dimensions and test valuesISO 5748:2004 -夾扭鉗和剪切鉗--頂切鉗--尺寸和測試值
Pliers and nippers -- End cutting nippers -- Dimensions and test valuesISO 5749:2004 -夾扭鉗和剪切鉗--斜嘴鉗--尺寸和測試值
Pliers and nippers -- Diagonal cutting nippers -- Dimensions and test valuesISO 6787:2001 -螺釘和螺母用裝配工具--活扳手
Assembly tools for screws and nuts -- Adjustable wrenchesISO 6788:1997 -螺釘和螺母用裝配工具--十字柄套筒扳手--尺寸和扭矩測試
Assembly tools for screws and nuts -- Four-way socket wrenches -- Dimensions and torque testISO 6789:2003 -螺釘和螺母用裝配工具--手動轉矩工具--設計一致性測試、品質一致性測試和重新校準程序的要求和測試方法
Assembly tools for screws and nuts -- Hand torque tools -- Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedureISO 691:2005 -螺釘和螺母用裝配工具--扳手和套筒扳手的開口--常用公差
Assembly tools for screws and nuts -- Wrench and socket openings -- Tolerances for general useISO 7738:2001 -螺釘和螺母用裝配工具--兩用扳手--扳手長度和頭部最小厚度
Assembly tools for screws and nuts -- Combination wrenches -- Lengths of wrenches and maximum thickness of headsISO 8764-1:2004 -螺釘和螺母用裝配工具--十字槽頭螺釘用旋具--第1部分：驅動頭
Assembly tools for screws and nuts -- Screwdrivers for cross-recessed head screws -- Part 1: Driver tipsISO 8764-2:2004 -螺釘和螺母用裝配工具--十字槽頭螺釘用旋具--第2部分：手動旋具刀身長度和標記的一般要求
Assembly tools for screws and nuts -- Screwdrivers for cross-recessed head screws -- Part 2: General requirements, lengths of blades and marking of hand-operated screwdriversISO 8976:2004 -夾扭鉗和剪切鉗--水泵鉗--尺寸和測試值
Pliers and nippers -- Multiple slip joint pliers -- Dimensions and test valuesISO 8979:2004 -電子器件夾扭鉗和剪切鉗--術語
Pliers and nippers for electronics -- NomenclatureISO 9242:1988 -夾扭鉗和剪切鉗--建築用紮線鉗--尺寸和測試值
Pliers and nippers -- Construction worker's pincers -- Dimensions and test valuesISO 9243:1988 -夾扭鉗和剪切鉗--木工用胡桃鉗--尺寸和測試值
Pliers and nippers -- Carpenter's pincers -- Dimensions and test valuesISO 9343:2004 -夾扭鉗和剪切鉗--鯉魚鉗--尺寸和測試值
Pliers and nippers -- Slip joint pliers -- Dimensions and test valuesISO 9654:2004 -電子器件夾扭鉗和剪切鉗--專用鉗--剪切鉗
Pliers and nippers for electronics -- Single-purpose nippers -- Cutting nippersISO 9655:2004 -電子器件夾扭鉗和剪切鉗--專用鉗--夾扭鉗
Pliers and nippers for electronics -- Single-purpose pliers -- Pliers for gripping and manipulatingISO 9656:2004 -電子器件夾扭鉗和剪切鉗--測試方法
Pliers and nippers for electronics -- Test methodsISO 9657:2004 -電子器件夾扭鉗和剪切鉗--通用技術條件
Pliers and nippers for electronics -- General technical requirementsISO/CD 3317 -裝配工具螺釘和螺母 - 六角帶或扁圓柱形的驅動方頭適配器，電源插座扳手
Assembly tools for screws and nuts -- Square drive adaptor with hexagon or cylindrical flat drive, for power socket wrenchesISO/CD 6789-1 -裝配工具螺釘和螺母 - 手動轉矩工具 - 要求和試驗方法設計一致性試驗，質量一致性試驗和重新校準程序 - 第1部分：要求和試驗方法設計一致性試驗，質量一致性測試和校準程序
Assembly tools for screws and nuts -- Hand torque tools -- Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure -- Part 1: Requirements and test method for design conformance testing, quality conformance testing and calibration procedureISO/CD 6789-2 -裝配工具螺釘和螺母 - 手動轉矩工具 - 要求和試驗方法設計一致性試驗，質量一致性試驗和重新校準程序 - 第2部分：測量不確定性的校準和測定的要求
Assembly tools for screws and nuts -- Hand torque tools -- Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure -- Part 2: Requirements for calibration and determination of measurement uncertainlyISO/DIS 2725-1 -裝配工具螺釘和螺母 - 方頭傳動套筒 - 第1部分：手動套筒
Assembly tools for screws and nuts -- Square drive sockets -- Part 1: Hand-operated socketsISO/DIS 7738 -裝配工具螺釘和螺母 - 組合扳手 - 梅花扳手頭部最大厚度長度
Assembly tools for screws and nuts -- Combination wrenches -- Lengths of wrenches and maximum thickness of headsISO/FDIS 2936 -裝配工具螺釘和螺母 - 六角螺絲鍵
Assembly tools for screws and nuts -- Hexagon socket screw keys